Loading...
HomeMy WebLinkAboutStarbucks (Uptown Temecula_ Jefferson) Sign Program807505 R4 SHEET: CUSTOMER APPROVAL: Los Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK S01 Project #10440-041 STARBUCKS #5949 JEFFERSON & OVERLAND TEMECULA, CA 92590 TRACT: - LOT: - COUNTY MAP REF #: - APN: 27375 JEFFERSON AVE. & OVERLAND TEMECULA, CA 92590 GENERAL NOTES: All work shall comply with 2013 Edition of CCR Title 24 which adopts and amends the 2012 IBC to 2013 California Building Code, 2013 UMC to 2013 California Mechanical Code, 2013 UPC to 2013 California Plumbing Code, 2008 NEC to 2013 California Electrical Code 2013 IFC to 2013 California Fire Code and the 2013 Title 24 Energy Efficiency Standards. CBC 1.8.3, LMMC 14.10.010. SCOPE OF WORK NEW SIGNS INCLUDE: One (1) new set of 14” channel letters Two (2) 48” Logo disks One (1) 30” Logo disk Two (2) DRIVE THRU wall sign cabinets One (1) Clearance bar Two (2) DRIVE THRU Directional signs One (1) THANK YOU/EXIT Directional sign Two (2) sets of channel letters for pylon sign One (1) Pre-menu board One (1) Digital order point screen & canopy One (1) 5-Panel menu board Four (4) sets of channel letters [monument sign] TABLE OF CONTENT Page 1 - Cover Page Page 1A to 1E - Sign Program Guideline Page 2 - Site Plan w/ Sign Location Page 3 - North, East, South & West sign elevations Page 4 - 14” Set of channel letters Page 5 - 48” Round logo disk Page 6 - 30” Round logo disk Page 7 - 48” DRIVE THRU cabinet Page 8 - Clearance bar Page 9 - 3’-10” DRIVE THRU Directional Page 10 - 3’-10” THANK YOU/EXIT Directional Page 11 - Pre-menu board Page 12 - Order point screen Page 13 - Order point screen housing unit Page 14 - 5-Panel menu board Page 15 - Enlarged plans of ground signs Page 16- New sets of letters on pylon sign 909-270-045 PLANNING APPLICATION # PA16-0357 APPROVAL DATE: CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R4 SHEET: CUSTOMER APPROVAL: Los Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK Submittal to Landlord: 1. Tenant shall submit three(3) sets of detailed shop drawings to the Landlord for written approval prior to city submittal or fabrication. Sign drawings to be prepared by a California licensed sign contractor. All signs must conform to the City of Temecula Planning Department requirements. 2. The shop drawings shall indicate size, materials, colors, location, construction details, attachment details, and lighting techniques of the proposed signage, all conforming with the sign criteria herein outlined. Submittal to City: 1. The Tenant or Tenant's sign company shall obtain and pay for all necessary p ermits. If Tenant has received written approval from Landlord, Tenant may submit the proposed sign design plans to theCity of Temecula Planning 2. The Tenant shall pay for all signs, related materials and installation fees (including final inspection costs). 3. It is the responsibility of the Tenant's sign company to verify all conduit and transformer locations and service access prior to fabrication. 4. Should a sign be removed, it is the Tenant's responsibility to patch all holes and paint surface to match the existing color. 5. The Landlord shall determine and approve the availability and position of a Tenant name on monument sign. 6. Tenant's sign contractor shall install required signage within 45 days after approval of shop drawings. If signage is not in place by that date, the Landlord may order sign fabrication and installation on Tenant's behalf and at Tenant's expense. Landlord shall notify Tenant of intent to fabricate and install such signage. 7. The Tenant shall be responsible for fulfillment of all requirements of this sign criteria. SUBMITTAL / APPROVAL REQUIREMENTS The intent of this criteria is to maintain consistency of colors and manufacturing methods. The following types of construction will be allowed: • Acrylic face pan channel letters/logos/cabinets • Acrylic formed face channel letters/logos/cabinets • Through-face and halo channel letters/logos/cabinets • Reverse pan channel letters/logos/cabinets • Routed face with push-through acrylic and applied vinyl graphics • Routed face with backed-up acrylic and applied vinyl graphics • Dimensional letters/logos • Painted copy/graphics All Tenant colors must be approved by the Landlord prior to fabrication. Sign colors should be selected to provide sufficient contrast against building background colors and still be compatible. Regardless of the maximum allowable sign square footage, the display must be balanced and proportional to the area upon which it is installed, as determined by owner or owner's agent. Sizes and quantity of signs for each Tenant is outlined in this criteria. SIGNAGE SPECIFICATIONS • Signs constituting a traffic hazard. No person shall install or maintain, or cause to be installed or maintained, any sign which simulates or imitates in size, color, lettering or design any traffic sign or signal in such a manner as to interfere with, mislead or confuse traffic. • Signs in Proximity to Utility Lines: Signs which have less horizontal or vertical clearance from authorized communication or energized electrical power lines that are prescribed by the laws of the state of California are prohibited. • Banners, Pennants and Balloons Used for Advertising Purposes. Note: Temporary flags, banners, or pennants, or a combination of same constituting an architectural feature which is an integral part of the design character of a project may be permitted upon Landlord and City approval. • Billboard signs. • Immoral or unlawful advertising which is obscene, indecent, or immoral in nature. • Window signs, except when specifically approved by the Landlord and the City of Temecula. • Exposed junction boxes, transformers, lamps, tubing, conduits, or neon crossovers of any kind. • All temporary signs are prohibited unless they are approved and permitted in accordance with Section 17.28 of the Temecula Municipal Code or specific plan. PROHIBITED SIGNS 1. Sign company to be fully licensed with the county and state and shall have full workman's compensation and general liability insurance. 2. All signs and their installation shall comply with all local building and electrical codes. 3. All electrical signs will be fabricated by a U.L. Approved sign company, according to U.L. specifications and bear U.L. Labels. U.L. labels shall be placed in an inconspicuous location. 4. In no case shall any manufacturer's label be visible from the street from normal viewing angles. 5. All penetrations of building exterior surfaces are to be sealed waterproof in color and finish to match existing exterior. 6. All sign fabrication work shall be of excellent quality. All logo images and type-styles shall be accurately reproduced. Lettering that approximates type-styles shall not be acceptable. The owner reser ves the right to reject any fabrication work deemed to be below standard. 7. Signs must be made of durable rust-inhibited materials that are appropriate and complimentary to the building. 8. Joining of materials (e.g., seams) shall be finished in a way as to be unnoticeable. Visible welds shall be continuous and ground smooth. Rivets, screws, and other fasteners that extend to visible sur faces shall be flush, filled, and finished so as to be unnoticeable. 9. Finished surfaces of metal shall be free from canning and warping. All sign finishes shall be free from dust, orange peel, drips, and runs and shall have a uniform surface conforming to the highest standards of the industry. 10. Exposed junction boxes, conduit, lamps, tubing, or neon crossovers of any type are not permitted. GENERAL CONSTRUCTION REQUIREMENTS Department for review. Tenant must submit one(1) full set of Landlord approved colored drawings. S01ACITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R4 SHEET: CUSTOMER APPROVAL: L os Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK Business identification: SIGN STANDARDS SIGN CLASS Wall, projecting, and awning signs, in any combination of six (6) signs max. per ground floor occupancy per frontage. One(1) of the five signs must have the business identification/name, with the remaining four signs as brand/product name and/or logo signs. SIGN TYPE Wall signs Projecting/Blade signs Awning signs MAXIMUM NUMBER / QUANTITY MAXIMUM SIGN AREA MAXIMUM SIGN HEIGHT Total height of wall and/or projecting signs is 5’-0”. Sign height may not exceed 80% of fascia height. NOTE: Signs must fit within designated areas on building fascia as specified in this sign program. See building elevations for locations. Max. sign height from grade: 8 ft. 1 sq. ft. of sign area per foot of primar y or secondary building frontage total for any combination of wall and/or projecting signs. 8 sq. ft. max for projecting signs. NOTE: total combined sign area not to exceed 70% of building fascia frontage. MEASUREMENT OF SIGN AREA Measurement of sign area: 1. The sur face area of a sign shall be calculated by enclosing the extreme limits of all lettering, background, emblem, logo, corporate branding, representation, or other display within a single continuous perimeter composed of squares or rectangles with no more than eight lines drawn at right angles. 2. Suppor ting framework or bracing that is clearly incidental to the display itself shall not be computed as sign area. 3. Double-faced signs with back-to-back sign faces shall be regarded as a single face sign if the distance between each sign face does not exceed two feet at any point. 4. Where a sign contains three-dimensional objects / embellishments (e.g., balls, cubes, clusters of objects, sculpture, or statue-like objects), the sign area shall be measured as the maximum projection of the objects upon a single ver tical plane. MEASUREMENT OF SIGN HEIGHT Measurement of sign height: The height of a sign shall be measured as the ver tical distance from the uppermost point used in measuring the area of the sign to the lowest elevation of the existing grade immediately below and adjoining the sign. grade slope Lettering with no sign board Lettering with no sign board Lettering with sign board S01BCITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R4 SHEET: CUSTOMER APPROVAL: L os Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK Awning signs: 1. Lettering/graphics shall be allowed on awning valances. Logos, symbols, and graphics may be allowed on the shed (slope) por tion of the awning. 2. Lettering/graphics shall be located within the middle 80 percent of the valance area. 3. Only permanent signs that are an integral par t of the awning or architectural projection shall be allowed. Temporary signs shall not be placed on awnings. 4. Awning signs shall only be allowed over door and window locations. 5. Awnings may be lighted from under the awning (back-lit) so that the awning appears internally illuminated. Lighting directed downwards to illuminate the awning is also allowed. 6. Awnings shall be regularly cleaned and kept free of dust and visible defects. Projecting signs: 1. Projecting signs shall not be less than eight feet above the sur face over which they project in pedestrian areas. Signs shall not project more than four feet into a public right-of-way and shall not project closer than two feet to a curb. 2. Projecting signs shall not be less than 8 feet above grade. 3. Projecting signs may have a maximum thickness of 14 inches. 4. Internally illuminated projecting signs shall have translucent or opaque face panels. On translucent faces the background including letters, logos, numbers, or symbols appear when illuminated. On opaque faces only the letters, logos, numbers, or symbols appear when illuminated. 5. Projecting signs shall not be closer than 15 feet to another projecting sign or to a freestanding sign or five feet from an interior proper ty line or line dividing two separate business frontages. 6. Projecting signs shall not project above an apparent eave or parapet, including the eave of a simulated hipped or mansard roof. 7. Projecting signs shall not be attached to the sloping face of mansard overhangs or other architectural devices intended to resemble or imitate roof str uctures. 8. A two-dimensional fabric banner suspended perpendicular to a wall may be displayed in lieu of a projecting sign, provided the banner shall meet all of the height, size, and projection requirements for a projecting sign. Wall signs: 1. Signs shall consist of individual letters, logo’s or cabinets and may be either internally or externally illuminated. 2. Electrical raceways shall be kept as small as possible, shall not extend beyond the outside edges of the sign copy, and shall be painted to match the color of the background on which they are placed. 3. Signs shall be placed flat against the wall and shall not project from the wall more than required for normal constr uction purposes and in no case more than 12 inches. The Planning Director may modify this requirement in special circumstances where a projection greater than 12 inches may be desirable to allow the creation of an especially creative and unique sign design. 4. Signs shall not be placed to obstruct any por tion of a window or cover architectural elements (e.g., cornices, transom windows, ver tical piers, and similar elements). Window signs, permanent and temporary: 1. Signs shall be allowed only on windows located on the ground floor. 2. Signs shall be permanently painted or mounted on the inside of doors and windows except for allowed temporary signs. 3. Signs within three feet of a storefront window shall be counted as a window sign. 4. Window signs shall be allowed in addition to the aggregate sign area allowed for wall and projecting signs. 5. Temporary Sign permits shall be obtained through the City of Temecula. STANDARDS FOR SPECIFIC SIGN TYPES S01CCITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R4 SHEET: CUSTOMER APPROVAL: L os Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK 1 2 3 LE T TE R H T . V A R I E S 6 7 8 9 DEPTH VARIES SECTION DETAILS - LED ILLUMINATION ALUMINUM FACE LETTER RETURN LED - NOT USED - - NOT USED - LOW VOLTAGE SECONDARIES CLEAR LEXAN BACK DRAIN HOLES MIN. FOUR(4) #10 X 3" SCREWS INTO ¼" NYLON ANCHORS, OR EQUIVALENT, PER LETTER CONDUIT PRIMARY ELECTRICAL SOURCE DISCONNECT SWITCH TRANSFORMER BOX POWER SOURCE GROUND WIRE SIGN FASCIA17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 7 8 17 13 12 11 10 LE T TE R H T . V A R I E S DEPTH VARIES WALL VARIES IN THICKNESS AND MATERIAL ACRYLIC FACE LETTER RETURN LED - NOT USED - - NOT USED - LOW VOLTAGE SECONDARIES LETTER BACK TRIM CAP DRAIN HOLES MIN. FOUR(4) #10 X 1" SCREWS INTO ¼" NYLON ANCHORS, OR EQUIVALENT, PER LETTER CONDUIT PRIMARY ELECTRICAL SOURCE DISCONNECT SWITCH TRANSFORMER BOX POWER SOURCE GROUND WIRE SIGN FASCIA17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 3 LE T TE R H T . V A R I E S 6 7 8 9 17 13 12 11 10 DEPTH VARIES WALL VARIES IN THICKNESS AND MATERIAL 1514 16 1514 16 PVC SPACER 3 6 9 ROUTED ALUMINUM FACE LETTER RETURN LED - NOT USED - - NOT USED - LOW VOLTAGE SECONDARIES CLEAR LEXAN BACK DRAIN HOLES MIN. FOUR(4) #10 X 3" SCREWS INTO ¼" NYLON ANCHORS, OR EQUIVALENT, PER LETTER CONDUIT PRIMARY ELECTRICAL SOURCE DISCONNECT SWITCH TRANSFORMER BOX POWER SOURCE GROUND WIRE SIGN FASCIA17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 8 17 13 12 11 10 LE T TE R H T . V A R I E S DEPTH VARIES WALL VARIES IN THICKNESS AND MATERIAL 1514 16 PVC SPACER 9 7 3 6 PUSH-THRU ACRYLIC COPY AND/OR GRAPHICS 18 18 ACRYLIC FACE LETTER RETURN LED - NOT USED - - NOT USED - LOW VOLTAGE SECONDARIES CLEAR LEXAN BACK DRAIN HOLES MIN. FOUR(4) #10 X 3" SCREWS INTO ¼" NYLON ANCHORS, OR EQUIVALENT, PER LETTER CONDUIT PRIMARY ELECTRICAL SOURCE DISCONNECT SWITCH TRANSFORMER BOX POWER SOURCE GROUND WIRE SIGN FASCIA17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 8 17 13 12 11 10 LE T TE R H T . V A R I E S DEPTH VARIES WALL VARIES IN THICKNESS AND MATERIAL 1514 16 PVC SPACER 9 7 3 6 ROUTED ALUMINUM FACE LETTER RETURN LED - NOT USED - - NOT USED - LOW VOLTAGE SECONDARIES CLEAR LEXAN BACK DRAIN HOLES MIN. FOUR(4) #10 X 3" SCREWS INTO ¼" NYLON ANCHORS, OR EQUIVALENT, PER LETTER CONDUIT PRIMARY ELECTRICAL SOURCE DISCONNECT SWITCH TRANSFORMER BOX POWER SOURCE GROUND WIRE SIGN FASCIA17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 8 17 13 12 11 10 LE T TE R H T . V A R I E S DEPTH VARIES WALL VARIES IN THICKNESS AND MATERIAL 1514 16 PVC SPACER 9 7 3 6 BACKED-UP ACRYLIC COPY AND/OR GRAPHICS 18 18 ACRYLIC FACE LETTER RETURN LED - NOT USED - - NOT USED - LOW VOLTAGE SECONDARIES LETTER BACK TRIM CAP DRAIN HOLES MIN. FOUR(4) #10 X 1" SCREWS INTO ¼" NYLON ANCHORS, OR EQUIVALENT, PER LETTER CONDUIT PRIMARY ELECTRICAL SOURCE DISCONNECT SWITCH RACEWAY POWER SOURCE GROUND WIRE SIGN FASCIA17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 17 13 12 11 10 WALL VARIES IN THICKNESS AND MATERIAL 1514 RACEWAY DEPTH VARIES GENERAL NOTES All work shall comply with 2010 Edition of CCR Title 24 which adopts and amends the 2009 IBC to 2010 California Building Code, 2009 UMC to 2010 California Mechanical Code, 2009 UPC to 2010 California Plumbing Code, 2008 NEC to 2010 California Electrical Code 2009 IFC to 2010 California Fire Code and the 2008 Title 24 Energy Efficiency Standards. CBC 1.8.3, LMMC 14.10.010. 16 UL Approved **SECTION DETAIL NOTES** The channel letter and logo section details shown on this page are the most commonly used and tenants are encouraged to use more than one type for their proposed signage. Creative and imaginative illumination types are key for a tr uly unique look and visual interest. REVERSE CHANNEL LETTERS W/ HALO-ILLUMINATIONCHANNEL LETTERS W/ FORWARD ILLUMINATION REVERSE CHANNEL LET TERS W/ PUSH-THRU GRAPHICS & DUAL ILL. REVERSE CHANNEL LETTERS W/ DUAL ILLUMINATION REVERSE CHANNEL LETTERS W/ BACKED-UP GRAPHICS & DUAL ILL.CHANNEL LETTERS W/ FORWARD ILLUMINATION ON RACEWAY S01DCITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R4 SHEET: CUSTOMER APPROVAL: L os Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK 1 2 3 4 5 LE T TE R H T . V A R I E S 6 7 8 9 DEPTH VARIES SECTION DETAILS - NEON ILLUMINATION ALUMINUM FACE LETTER RETURN NEON TUBE ELECTRODE INSULATING BOOT INSULATED GTO NEON TUBE SUPPORT CLEAR LEXAN BACK DRAIN HOLES MIN. FOUR(4) #10 X 3" SCREWS INTO ¼" NYLON ANCHORS, OR EQUIVALENT, PER LETTER CONDUIT PRIMARY ELECTRICAL SOURCE DISCONNECT SWITCH TRANSFORMER BOX TRANSFORMER GROUND WIRE SIGN FASCIA17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 7 8 17 13 12 11 10 LE T TE R H T . V A R I E S DEPTH VARIES WALL VARIES IN THICKNESS AND MATERIAL REVERSE CHANNEL LETTERS W/ HALO-ILLUMINATION ACRYLIC FACE LETTER RETURN NEON TUBE ELECTRODE INSULATING BOOT INSULATED GTO NEON TUBE SUPPORT LETTER BACK TRIM CAP DRAIN HOLES MIN. FOUR(4) #10 X 1" SCREWS INTO ¼" NYLON ANCHORS, OR EQUIVALENT, PER LETTER CONDUIT PRIMARY ELECTRICAL SOURCE DISCONNECT SWITCH TRANSFORMER BOX TRANSFORMER GROUND WIRE SIGN FASCIA17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 LE T TE R H T . V A R I E S 6 7 8 9 17 13 12 11 10 DEPTH VARIES WALL VARIES IN THICKNESS AND MATERIAL CHANNEL LETTERS W/ FORWARD ILLUMINATION REVERSE CHANNEL LET TERS W/ PUSH-THRU GRAPHICS & DUAL ILL. 1514 16 1514 16 PVC SPACER 3 4 5 6 9 ROUTED ALUMINUM FACE LETTER RETURN NEON TUBE ELECTRODE INSULATING BOOT INSULATED GTO NEON TUBE SUPPORT CLEAR LEXAN BACK DRAIN HOLES MIN. FOUR(4) #10 X 3" SCREWS INTO ¼" NYLON ANCHORS, OR EQUIVALENT, PER LETTER CONDUIT PRIMARY ELECTRICAL SOURCE DISCONNECT SWITCH TRANSFORMER BOX TRANSFORMER GROUND WIRE SIGN FASCIA17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 8 17 13 12 11 10 LE T TE R H T . V A R I E S DEPTH VARIES WALL VARIES IN THICKNESS AND MATERIAL 1514 16 PVC SPACER 9 7 3 4 5 6 PUSH-THRU ACRYLIC COPY AND/OR GRAPHICS 18 18 REVERSE CHANNEL LETTERS W/ DUAL ILLUMINATION ACRYLIC FACE LETTER RETURN NEON TUBE ELECTRODE INSULATING BOOT INSULATED GTO NEON TUBE SUPPORT CLEAR LEXAN BACK DRAIN HOLES MIN. FOUR(4) #10 X 3" SCREWS INTO ¼" NYLON ANCHORS, OR EQUIVALENT, PER LETTER CONDUIT PRIMARY ELECTRICAL SOURCE DISCONNECT SWITCH TRANSFORMER BOX TRANSFORMER GROUND WIRE SIGN FASCIA17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 8 17 13 12 11 10 LE T TE R H T . V A R I E S DEPTH VARIES WALL VARIES IN THICKNESS AND MATERIAL 1514 16 PVC SPACER 9 7 3 4 5 6 REVERSE CHANNEL LETTERS W/ BACKED-UP GRAPHICS & DUAL ILL. ROUTED ALUMINUM FACE LETTER RETURN NEON TUBE ELECTRODE INSULATING BOOT INSULATED GTO NEON TUBE SUPPORT CLEAR LEXAN BACK DRAIN HOLES MIN. FOUR(4) #10 X 3" SCREWS INTO ¼" NYLON ANCHORS, OR EQUIVALENT, PER LETTER CONDUIT PRIMARY ELECTRICAL SOURCE DISCONNECT SWITCH TRANSFORMER BOX TRANSFORMER GROUND WIRE SIGN FASCIA17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 8 17 13 12 11 10 LE T TE R H T . V A R I E S DEPTH VARIES WALL VARIES IN THICKNESS AND MATERIAL 1514 16 PVC SPACER 9 7 3 4 5 6 BACKED-UP ACRYLIC COPY AND/OR GRAPHICS 18 18 **SECTION DETAIL NOTES** The channel letter and logo section details shown on this page are the most commonly used and tenants are encouraged to use more than one type for their proposed signage. Creative and imaginative illumination types are key for a tr uly unique look and visual interest. ACRYLIC FACE LETTER RETURN NEON TUBE ELECTRODE INSULATING BOOT INSULATED GTO NEON TUBE SUPPORT LETTER BACK TRIM CAP DRAIN HOLES MIN. FOUR(4) #10 X 1" SCREWS INTO ¼" NYLON ANCHORS, OR EQUIVALENT, PER LETTER CONDUIT PRIMARY ELECTRICAL SOURCE DISCONNECT SWITCH RACEWAY TRANSFORMER GROUND WIRE SIGN FASCIA17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 17 13 12 11 10 WALL VARIES IN THICKNESS AND MATERIAL CHANNEL LETTERS W/ FORWARD ILLUMINATION ON RACEWAY 1514 RACEWAY DEPTH VARIES GENERAL NOTES All work shall comply with 2010 Edition of CCR Title 24 which adopts and amends the 2009 IBC to 2010 California Building Code, 2009 UMC to 2010 California Mechanical Code, 2009 UPC to 2010 California Plumbing Code, 2008 NEC to 2010 California Electrical Code 2009 IFC to 2010 California Fire Code and the 2008 Title 24 Energy Efficiency Standards. CBC 1.8.3, LMMC 14.10.010. 16 UL Approved S01ECITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R4 SHEET: CUSTOMER APPROVAL: Los Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK SITE PLAN 1” = 20’-0” SCALE 1139214” SET OF LETTERS 1 DESIGN #SQ.FT. (ea)QUANT TOTALSIGNDESCRIPTION MANUFACTURE & INSTALL 30” LOGO DISK 48” LOGO DISK 6.25 12.56 6.25 25.12 1 2 A 21.9 21.9 13193 13163 SHIP & INSTALL DESIGN #SQ.FT. (ea)QUANT TOTALSIGNDESCRIPTION 5-PANEL MENU BOARD 14119 X 1 XK DIGITAL ORDER SCREEN & HOUSING X 1 X14163 14116 14104 14091 “DRIVE THRU” DIRECTIONAL “EXIT/THANK YOU” DIRECTIONAL 1.51 0.94 1 1 1.51 0.94H CLEARANCE BAR 2.29 2.291E14106 PRE-MENU BOARD X 1 XI14120 B1 B2 C J1 J2 H N 14099DRIVE THRU S/F CABINET 4.52 2 9.04D1 D2 F E J1 J2 K I F B1 D1 B2 D2 C A CUSTOM9 1/4” SETS OF LETTERS 2X15.46 30.92 S02CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R4 SHEET: CUSTOMER APPROVAL: L os Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK 3/32” = 1’-0” SCALE 3/32” = 1’-0” SCALE NORTH ELEVATION EAST ELEVATION 3/32” = 1’-0” SCALE 3/32” = 1’-0” SCALE SOUTH ELEVATION WEST ELEVATION A B1 D1 CB2 D2 16 ’ - 3 ” t o g r a d e 1’-4”1’-4” 10 ’ - 1 1” to g r a d e 13 ’ - 1 ” t o g r a d e 8’-3”8’-3” 10 ’ - 1 1” to g r a d e 1 1’ - 1 0 1 / 2 ” to g r a d e 11’-0”11’-0”48” 15 ’ - 7 1 / 2 ” to g r a d e 30”9’-0”9’-0” S03 18’-9 3/4”48” 27375 CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R4 SHEET: CUSTOMER APPROVAL: L os Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK 1/4” dia x 3” long lag bolts into wood studs (min 6 req’d) Quantity: One(1) Set, MANUFACTURE & INSTALL Scale: 1/2" = 1'-0" Design: 11392AONE SET OF IN-LINE ILLUMINATED PAN CHANNEL LETTERS RACEWAY BEHIND PARAPET inside raceway behind parapet S04 SPECIFICATIONS: Sign must be approved by the National Electrical Code, Underwriters Laborator y, CUL, and all applicable local codes. Disconnect switch in primary to be within sight of sign (sign includes power supply enclosure) REF: NEC 110-3[B] 600-2, 600-4 Primar y electrical source (1/2"(13mm) conduit minimum) REF: NEC 600-6, 600-21 (provided by installer) Internally illuminated channel letters to be fabricated from 0.040 / 3003 aluminum with pre painted White interiors and painted Black polyurethane exteriors, 3"(76mm) deep. Letters backs to be .063 Black & White aluminum pop- riveted to sidewalls and sealed. Faces to be 3/16"(5mm) White acr ylic with 1”(25mm) Black Trimcap retainer edging. Letter face vinyl is 1st sur face 3M 3630-76 Holly Green vinyl with scratch borders. Internally illuminate letters with Lumificient White LED's attached to inside of letter backs. Power with 120v Lumificient power supplies. Power to be located behind wall. Fasten letters flush to wall fascia with raceway mounted behind parapet. 14in (356mm) Flush Mounted In-line Illuminated Letters(green) 1 2Sq.Ft.Sq.Ft.2Sq.M.1Sq.M.Size 14" (356mm) Volts Amps 120 0.6max21.9 21.17 0.762.04 1.) Figured as one rectangular area 2.) Figured as extreme perimeter of copy area 3/16” White acr ylic w/ 3M Holly Green vinyl overlay CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R4 SHEET: CUSTOMER APPROVAL: L os Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK QUANTITY: Two (2), Manufacture and Install TWO (2) NEW SINGLE FACE ILLUMINATED DISK LOGO CABINETS Scale: 3/4" = 1'-0" Design: 13163 ¼" dia x 3" long lag bolts into wood studs (min 6 req’d) Disk 48in S/F Illuminated wall mount EVOLVED Sq.Ft.Sq.M. 12.56 1.17 Size 48" (1219mm) Volts 120 SPECIFICATIONS: 48"(1219mm) Single faced internally illuminated wall mount logo disk. Cabinet to be 3"(76mm) deep, fabricated aluminum sidewalls and back. Paint cabinet black polyurethane. Faces to be 3/16"(5mm) Acr ylite 015-2GP. 1"(25mm) black trimcap with square head screws retainer edging. Graphics of logo to be 1st sur face 3M Translucent Scotchcal vinyl- Holly Green #3630-76. Siren to show thr u White. Internally illuminate logo disk with Lumificient white LED's installed to back of disk. Power with self-contained Lumificent power supply contained with an U.L. enclosure covered in white vinyl film. Fasten to wall with required fasteners. Sign must be approved by the National Electrical Code, Under writers Laborator y, CUL, and all applicable local codes. Disconnect switch in primar y to be within sight of sign (sign includes power supply enclosure) REF: NEC 110-3[B] 600-2, 600-4. Primar y electrical source 1/2"(13mm) conduit minimum) REF: NEC 600-6, 600-21(provided by installer). AA B C C Electric Sign Enseigne Electrique Issue No. E21197 C US 48 " (1 2 1 9 m m ) 3 1/2"(89mm)- 3 3/4"(95mm) O.C. typ. A 3" (76mm) AB 3 48" (1219mm) 1 1/4"(32mm) typ. 4 3" (76mm) C C C Adjust LED lamps spacing around power supply to minimize shadowing 2B1B S05CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R4 SHEET: CUSTOMER APPROVAL: L os Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK ¼" dia x 3" long lag bolts into wood studs (min 6 req’d) Quantity: One (1) logo; Manufacture & install ONE (1) S/F ILLUMINATED DISK LOGO CABINET Design: 13193C1” = 1’-0” SCALE S06CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R4 SHEET: CUSTOMER APPROVAL: L os Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK TWO (2) NEW SINGLE FACE ILLUMINATED DIRECTIONAL WALL SIGNS Scale: 1" = 1'-0"QUANTITY: Two (2), Manufacture and Install Design: 14099 Stud Primary power source 2D1D S07CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R4 SHEET: CUSTOMER APPROVAL: L os Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK Scale: 1/2" = 1'-0" NEW DT CLEARANCE BAR ARROW SERIES FREESTANDING Quantity: One(1) Clearance BarE Design: 14106 S08CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R5 SHEET: CUSTOMER APPROVAL: L os Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK R5 04/21/16 TORK Quantity: One(1) Directional Sign ONE NEW ILLUMINATED D/F DIRECTIONAL SIGN Scale: 1" = 1'-0" Design: 14104F S09 1’ - 7 ” 12 ” EAST ELEVATION - COLOR SAMPLE Painted to match SW-BLACK FOX [SW7020] Painted to match SW-BLACK FOX [SW7020] CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R5 SHEET: CUSTOMER APPROVAL: L os Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK R5 04/21/16 TORK S10 Scale: 1" = 1'-0" ONE NEW ILLUMINATED D/F DIRECTIONAL SIGN Quantity: Two(2) Directional Signs Design: 14091H Painted to match SW-BLACK FOX [SW7020] EAST ELEVATION - COLOR SAMPLE Painted to match SW-BLACK FOX [SW7020] CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R4 SHEET: CUSTOMER APPROVAL: Los Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK Quantity: One(1) PRE-MENU FREESTANDING SIGN Scale: 3/4" = 1'-0" SCOPE OF WORK: Manufacture by DSA Phototech. YESCO TO INSTALL ONLY. Design: 14120I S11CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R4 SHEET: CUSTOMER APPROVAL: Los Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK [27.83"] [4 6 . 8 5 " ] NEW ORDER POINT SCREEN - FOR FREESTANDING CANOPY Scale: NTS Design: 14116 QUANTITY: One (1) - Install Only. Manufactured by Others. PHOTO’S OF TYPICAL FREESTANDING CANOPY WITH ORDER POINT SCREEN 1J S12CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R4 SHEET: CUSTOMER APPROVAL: Los Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK Quantity: One (1) NEW DIGITAL “ORDER CONFIRMATION” HOUSING UNIT - FREESTANDING Scale: 1/2" = 1'-0" Design: 14163 SCOPE OF WORK: Manufacture by DSA Phototech. YESCO TO INSTALL ONLY.2J S13CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R4 SHEET: CUSTOMER APPROVAL: Los Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK Quantity: One(1) 5-PANEL MENU FREESTANDING SIGN Scale: 3/8" = 1'-0" Design: 14119 SCOPE OF WORK: Manufacture by DSA Phototech. YESCO TO INSTALL ONLY. K S14CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R4 SHEET: CUSTOMER APPROVAL: Los Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK Scale: 1/4" = 1'-0" K J1 J2 I E F H S15CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016 807505 R4 SHEET: CUSTOMER APPROVAL: Los Angeles Division 10235 BELLEGRAVE AVE. JURUPA VALLEY, CA 91752 TEL: (909) 923-7668 FAX: (909) 923-5015 2016 by YESCO LLC www.yesco.com All rights reserved. CALIFORNIA CONTRACTOR LICENSE NO. 980698 SIGNATURE PROJECT NUMBER: This drawing was created to assist you in visualizing our proposal. The original ideas herein are the property of YESCO SIGNS, LLC. Permission to copy or revise this drawing can only be obtained through a written agreement with YESCO. See your sales representative or call the nearest office of YESCO. This sign is intended to be installed in accord- ance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. Colors represented in this drawing are for pre- sentation only. They cannot match actual pro- cesses being used on finished products. All salespersons can reference manufacturer’s color charts at your request. Cost of providing necessary wiring to sign area is not included in this sign proposal. DATE PRODUCTION APPROVAL: SALES EXECUTIVE DATE PRODUCTION MGR.DATE CLIENT: 27375 JEFFERSON AVE. TEMECULA, CA 92590 07/31/15 TORK JAY RESAR DESIGN: DATE: ACCOUNT EXECUTIVE: REV./DATE/DESIGNER Accepted w/o changes Accepted w/ changes as noted Revise as noted & re-submit R1 01/07/16 TORK R2 02/02/16 TORK R3 03/03/16 TORK R4 04/01/16 TORK TWO (2) NEW SETS OF ILLUMINATED CHANNEL LETTERS ON EXISTING D/F PYLON SIGN QUANTITY: TWO (2) SETS, MANUFACTURE & INSTALL 3/4” = 1’-0” SCALE 15.46 SQFT/SIDE LETTERS TO BE 3” DEEP WITH 1” BLACK TRIMCAP STARBUCKS COFFEE FACES TO BE WHITE ACRYLIC WITH 1ST SURFACE 3M #3630-76 HOLLY GREEN VINYL OVERLAY WITH SCRATCH BORDERS DRIVE THRU FACES TO BE WHITE ACRYLIC WITH 1ST SURFACE 3M DAY/NIGHT VINYL OVERLAY INTERNALLY ILLUMINATE LETTERS WITH LUMIFICIENT WHITE LED POWER WITH 120V LUMIFICIENT POWER SUPPLIES FASTEN LETTERS FLUSH TO EXISTING MONUMENT SIGN FACE X 12’-10” CONCEPT PROPOSAL EXISTING SIGN S16 9 1 / 4 ” Existing set of letters to be removed and replaced with STARBUCKS COFFEE and DRIVE THRU letters 9 1 / 4 ” 6” CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CITY OF TEMECULA APPROVAL CI T Y O F T E M E C U L A A P P R O V A L CITY OF TEMECULA APPROVALCITY OF TEMECULA APPROVAL APPROVED SUBJECT TO BUILDING DEPT. APPROVAL CITY OF TEMECULA PLANNING DEPT.PROJECT MEETS ZONING STANDARDS PERMITS ARE REQUIRED APPROVED BY: brandon.rabidou 05/13/2016